3 - Strand Twisted Polyester Pulling Rope (For Low Force Cable Pullers)

This strong synthetic fiber is low stretch, resistant to ultraviolet deterioration; it is rot and mildew resistant giving it great weather resistance abilities. Low water absorbency means minimal strength loss when wet. Used in low force cable pullers.  Select a rope with an average breaking strength at least four times the rated capacity of your puller (rope safety factor). A safety factor of 4:1 minimum or greater than 4:1 is REQUIRED for pulling inside of raceways with a minimum of rope length exposed. Higher safety factors are recommended if the pulling rope is exposed! Spliced eyes on both ends.   * Other lengths available upon request ** Do not exceed Working Load Limits     
rope safety = factor

 

 rope average
breaking strength
maximum pull force
developed by your
cable puller

 

 

Item

Diameter

Length

Lb.

Cube

Break

Working

  

 Sample of spool
 

#

 In mm Feet * Meter

Ea.

Each

Strength

Load **

  
 

12668

 3/8 9 100 30

4.39

.126

3,190 lbs

399 lbs

  
 

12669

 3/8 9 300 91

13.09

.38

3,190 lbs

399 lbs

  
 

12670

 3/8 9 600 183

26

.83

3,190 lbs

399 lbs

  
 

12671

 3/8 9 1,200 366

52

1.66

3,190 lbs

399 lbs

  
 

12672

 1/2 13 300 91

23

.80

5,594 lbs

699 lbs

  
 

12673

 1/2 13 600 183

46

1.53

5,594 lbs

699 lbs

  
 

12674

 1/2 13 1,200 366

92

3.06

5,594 lbs

699 lbs

  
 

12675

 5/8 16 300 91

36

2.04

8,608 lbs

1,076 lbs

  
 

12676

 5/8 16 600 183

72

2.04

8,608 lbs

1,076 lbs

  
 

12677

 5/8 16 1,200 366

144

4.08

8,608 lbs

1,076 lbs

  
 

12678

 3/4 19 300 91

52

1.52

12,320 lbs

1,540 lbs

  
 

12679

 3/4 19 600 183

103

2.60

12,320 lbs

1,540 lbs

  
 

12680

 3/4 19 1,200 366

207

6.06

12,320 lbs

1,540 lbs